Lube Oil Vent Mist Eliminator Data and Information

To ensure design accuracy, please provide as much information as possible.

Contact Information: Required fields are bold

Name
Title
Company
Street address
Address (cont.)
City
State/Province
Zip/Postal code
Country
Date
Date Quotation Req'd
Phone
FAX
E-mail
End User
Location
Proposal No.
Customer Ref.
Date Inquiry 
Date Proposal
Budget
Firm
Shipment desired by


The information we request in the boxes below will help us return a design specific to your application. Please provide as much detail as possible.

A. Gas max. design flow rate:
Actual ft3/min (m3/min)
Standard ft3/min (m3/min)
Temperature çF
Elevation in ft. (m)
Atmospheric (Barometric) pressure
 

B. Maximum differential pressure (across elements) that we can add to the exhaust back pressure.
 
If there is an exhaust fan or blower with a damper on the exhaust line or a recycle line the max pressure drop allowed can be estimated by noting the reservoir static pressure at normal operating conditions (usually a negative value in inches of water column) then noting it again with the damper fully open or the recycle line closed. The difference in the two static pressures (with a factor of safety applied) is the max additional pressure drop allowed.
Max pressure drop allowed in. W.C.
C. Maximum reservoir static pressure in. W.C.

D. Max. gas temperature (of gas at the mist eliminator or exhaust, in çF)

E. Gas density at the operating conditions (or we will use atmospheric air density at temperature and altitude given above) in lb/ft3 (kg/m3)


F. Exhaust vent size
(Pipe size and schedule so that we can include matching 150 lb. ANSI flange mating dimensions on the inlet and exhaust nozzles of the mist eliminator)
Pipe, nominal diam. in inches
Pipe Schedule
Flange Rating

G. Estimate of amount of liquid mist in the vapor
(Amount of make-up oil is one way of estimating).
Amount of make-up oil, lb/day
OR
Amount of make-up oil, gal/day

H. Liquid density at operating conditions in lb/ft3 (kg/m3)


I. Existing fan/blower to be used:
Yes
No

J. Name plate identification data of fan and motor:


K. Fan/blower to be supplied with mist eliminator, by Koch
Yes
No

L. Location of exhaust fan/blower preferred
Before
After
the mist eliminator


Turbine manufacturer

Name
Model name/no.
Size
kW/MW, in Bhp